EPD (Type III environmental declaration): Environmental declaration providing quantified environmental data using predetermined indicators and, where relevant, supplemented by other environmental information. A third-party verified environmental communication sheet, based on an LCA and compliant with the ISO 14025 standard.
PEP (Profil Environnemental Produit): the EPD of the electrical, electronic and HVAC sector, drafted according to PEP Ecopassport rules. All PEPs are EPDs, but not all EPDs are PEPs.
FDES (Fiche de Déclaration Environnementale et Sanitaire): the EPD of the construction materials sector, drafted according to INIES rules.
IBU (Institut Bauen und Umwelt): the German programme operator, one of the oldest and most extensive in Europe, strongly oriented towards construction products.
PO (Programme operator): the body that sets the methodological rules of a market, accredits the verifiers and hosts the EPD register (PEP Ecopassport, International EPD System, EPD Global/Norge, IBU, EPD Italy, EPD Denmark, etc.).
PCR (Product Category Rules): the general methodological rules of a large product family, set by each programme.
PSR (Product Specific Rules): the rules specific to a product category, in the vocabulary of PEP Ecopassport.
c-PCR (complementary Product Category Rules): the rules specific to a product category, in the vocabulary of International EPD System.
NPCR Part-B (Norwegian Product Category Rules, part B): the rules specific to a product category, in the vocabulary of EPD Norge.
Sub-PCR: the rules specific to a product category, in the vocabulary of EPD Italy.
PCR Part-B (Product Category Rules, part B): the rules specific to a product category, in the vocabulary of IBU.
INIES: the French reference database of environmental declarations, used for the RE2020.
MRA (Mutual Recognition Agreement): an agreement between two programme operators that mutually recognise each other’s rules and/or EPDs, under certain conditions. The levels of recognition are detailed in our “EPD Programmes in Europe” white paper.
Publication fees: the amount charged by the programme operator to register and host a published EPD.
Individual EPD: a declaration that covers a single product reference.
Collective (or representative) EPD: a declaration that covers a whole family of products sharing the same materials, processes and functions. It greatly reduces the number of EPDs, and therefore the cost, for a large catalogue.
Homogeneous environmental family: a group of products (same raw materials, same processes, same functional unit) coverable by a single EPD.
SKU (Stock Keeping Unit): a product reference, identified by a unique code. A single EPD can cover several SKUs of the same family.
LCA (Life Cycle Assessment): compilation and evaluation of the inputs (product, material or energy flows entering a unit process), outputs (product, material or energy flows leaving a unit process) and environmental impacts of a product system throughout its life cycle (ISO 14040).
LCI (Life Cycle Inventory): phase of life cycle assessment involving the compilation and quantification of inputs and outputs for a given product system throughout its life cycle (ISO 14040).
LCI database: a structured set of datasets describing the inputs, outputs and impacts associated with products or human activities. These databases, such as ecoinvent, make it possible to model supply chains and quantify environmental impacts in LCAs.
BOM (Bill of Materials): a hierarchical, structured list of all the components, materials and subsystems that make up a product.
Collection file: the standardised spreadsheet, adapted to each product category, used to gather the data before starting the LCA.
FU (Functional unit): quantified performance of a product system for use as a reference unit in a life cycle assessment (ISO 14040).
RSL (Reference Service Life): the product service life used for its life cycle assessment. If a PCR exists or is mandatory, it sets this service life; otherwise, it can be defined by the manufacturer.
Modules A1-A3 / A4-A5 / B / C / D: the life cycle stages (production, transport-site, use, end of life, beyond) defined by the EN 15804+A2 standard.
Specific data: data specific to your product, more reliable and generally more favourable than a default value.
Generic (or default) data: an industry average figure, used when specific data is not available.
Verification: a mandatory check before publication, carried out by an accredited verifier independent of the person who performed the LCA. The manufacturer cannot self-verify. It may be internal (an accredited verifier from the same organisation, distinct from the one who produced the study) or external (a fully independent body, required by certain regulations).
RE2020 (Réglementation Environnementale 2020): the French regulation for new buildings that incorporates the environmental impact of equipment, and the main driver of demand for PEP.
ESPR (Ecodesign for Sustainable Products Regulation): the European framework regulation on eco-design, which introduces the DPP.
DPP (Digital Product Passport): the digital environmental identity card, mandatory by category from 2027 to 2030. LCA data, including data from EPDs, feeds directly into it.
CPR (Construction Products Regulation): progressively incorporates environmental declaration requirements for construction products.
CSRD (Corporate Sustainability Reporting Directive): the sustainability reporting directive; Scope 3 relies on the EPD data of suppliers.
Scope 3: the indirect emissions of the value chain (including purchases), which LCA results help document.
WEEE (Waste Electrical and Electronic Equipment): the European directive on the take-back and recycling of EEE at end of life.
EEE (Electrical and Electronic Equipment) and HVAC (Heating, Ventilation, Air Conditioning): Qweeko’s two core specialities.
An EPD describes the environmental impact of a product, based on an LCA covering its entire life cycle, from raw materials to end of life. Once verified, it is the document you share with your clients to prove your product’s impact.
"EPD" is the generic term; several programmes exist in Europe, each with its own framework. PEP Ecopassport is the one dedicated to electrical, electronic and HVAC products: a PEP is therefore an EPD built according to the rules of our sector, the reference best suited to your products.
Yes, an independent verifier accredited by the programme checks the calculations and the data before publication. We have accredited verifiers in-house, and we call on external verifiers when a regulation requires it.
It depends on your needs and the plan. With Qweeko Start (we do it for you), the cost combines support and an amount per product family: the price stays the same whether the family has 1 or 100 references, plus verification. With Qweeko Pro (you produce them yourself), it is an annual licence per user, independent of the number of EPDs: the more your catalogue grows, the lower the cost per EPD. Added to this are the publication fees specific to each programme, as well as the price of verification, which is specific to each verifier. The simplest way to get a precise figure: let us scope your catalogue together.
Once your data has been collected, generating the EPD takes a few hours, then verification and publication a few days: these are the steps where our solutions save you the most time. Data collection remains the main delay factor, as it depends on your suppliers; our experts support you in structuring it.
Rarely one per reference. We group products into homogeneous environmental families (same materials, same processes, same functions), coverable by a single EPD. Send us your catalogue: we carry out a grouping study.
No, prioritise the references where there is real client demand. There is no point declaring products that no one asks for.
Yes. French in origin, it has an international reach thanks to compliance with the ISO 14025 and EN 15804+A2 standards.
The programme or programmes you need depend on several factors: distribution markets, type of clients and product type. The good news: with the same data set, you can address any programme.
We send a collection file adapted to your type of product.
Several options:
An EPD goes further than a simple carbon footprint figure and requires a different data collection. It is possible to start from your existing study, but it will need to be completed.
Yes: the data collected at the LCA level can be reused. If the methodology differs, we check the gap. You do not start from scratch.
Yes. Many clients start with Qweeko Start, build up their skills, then move to Qweeko Pro.
2 minutes to find out which regulations concern you and which programme to target on your markets.
Get started